Etelux Glove Box Automatic Warehouse Door Technology


The warehouse door of Etelux’s glove box has been upgraded from manual opening to automatic opening. There are two modes for automatic opening:
1.Step mode
2.Auto mode
The step mode is a menu question-and-answer operation, which realizes human-computer interaction in a real sense.

Automatic mode operation process:
Automatic mode is to select "automatic mode" in the menu. In the automatic mode, when the glove box needs to be fed in and out, the inner and outer doors of the big warehouse will be opened in turn. The user only needs to put the materials into the big warehouse after the warehouse door is opened, and then take out the warehouse door after the other side is opened The material can be used. During the whole process, the warehouse door is automatically opened and closed, which is very convenient. At the same time, the warehouse door is equipped with a sensor. When the warehouse door starts to close, if the user's hand reaches near the warehouse door, the movement of the warehouse door will immediately change and open, and the user does not need to worry about being caught by the warehouse door.
Step mode operation process:
1. Vacuum
2. Supplement
3. The inner door opens
4.Inner door closed
5.The outer door opens
6.The outer door is closed

评论

发表评论

此博客中的热门博文

Classification and Principle of Carbon Dioxide Sensor

Classification of carbon dioxide sensors In industrial, agricultural and other environmental wireless data collection, transmission, and monitoring, gas sensors are more sensor equipment used, and carbon dioxide sensors are the most commonly used in the market. The classification of carbon dioxide sensors is described below. 1. Thermal conductivity pool carbon dioxide sensor The thermal conductivity cell carbon dioxide sensor is a device that uses the thermal conductivity of carbon dioxide gas. When the thermal conductivity of two or more gases is quite different, the thermal conductivity element can be used to distinguish the content of one of the components. Of course, this equipment can be used not only for measuring the concentration of carbon dioxide gas, but also for measuring hydrogen and certain rare gases. However, due to some specific reasons (such as technical blockade, etc.), this type of equipment is not often found in domestic coal mines. see. 2. Catalys
阅读全文

Features of Large Caliber Bellows hose

As the name implies, the large-diameter bellows hose is larger than the ordinary type of bellows hose. The larger diameter of the bellows hose has different functional characteristics. The manufacturer produces and processes the product according to customer needs. This article is You elaborated on the main features of this product. 　　 Features of large-diameter bellows hose: 1. The bending radius should not be less than the given bending radius to prevent damage to the bellows hose skeleton or early damage due to excessive stretching. 2. According to the conditions of use, choose the correct type and specifications of the bellows hose, and do not misuse or substitute. 3. When using the bellows hose, the pressure should be adjusted slowly and evenly to avoid the sudden pressure increase and damage to the pipe body. 4. When the working place changes, it should be carried away from the ground, not to drag the ground, so as to avoid corrosion of the skeleton layer after scratching t
阅读全文

Can Single Row Orthodontics Really Save Money?

  When doing orthodontics, some people can't help asking: My lower teeth are quite neat, can I only correct the upper teeth? I don’t want to spend so much money, can I just correct one row of teeth? What is the purpose of correction? Think about the orthodontists we saw on the street. Are they wearing braces up and down, but almost never see a single row of teeth. Why? This is because orthodontics is not simply aligning the teeth, it is to make the teeth more beautiful and healthier on the basis of maintaining the chewing function of the teeth themselves. What are the hazards of correcting only a single row of teeth? 1. Affect the chewing function of teeth If only the upper jaw is made and the lower jaw is not made, all the teeth involved in the correction of the upper jaw will move to a certain extent after the alignment, while the uncorrected teeth of the lower jaw will not move, resulting in changes in the bite.   When only part of the correction is done, t
阅读全文