Application of Vacuum Drying of Cleaning Machine
Vacuum
drying is to place the dried object in a low vacuum environment, reduce the
boiling point of water through the low vacuum environment, so that the liquid
water on the surface of the object starts to boil and evaporate rapidly at room
temperature, so as to achieve the purpose of rapid drying. Vacuum drying is not
affected by the temperature and the shape of the dried object, even if there
are deep holes and grooves on the surface of the object, it can also be dried.
Common
vacuum schemes for vacuum drying:
Dry
vacuum pump (dry screw multi-stage Roots): small volume, low energy
consumption, water vapor resistance, expensive.
Water
ring roots vacuum unit: large volume, high energy consumption, water vapor resistance,
low price.
Oil
vane vacuum pump: small volume, low energy consumption, low price, not
resistant to water vapor, high pre-treatment requirements, unstable operation,
high failure rate.
During
vacuum drying, valve 1 and valve 2 are opened, water ring pump is opened, and
vacuum pumping is started. When the cavity vacuum reaches - 90kpa, the vacuum
gauge gives a signal to start roots pump (roots pump belongs to mechanical
booster pump, which cannot be started under atmospheric pressure and needs to be
started under vacuum).
Shut
off valve 2, then roots pump, then valve 1, then water ring pump.
评论
发表评论