Analysis of the Accuracy Verification Method of Portable Gas Analyzer
The accuracy verification method of the
portable gas analyzer is as follows:
1. Error analysis
In the application process of the
analytical instrument, an error analysis must be made for the data of each
measurement result to determine the authenticity, reliability and credibility
of the data analysis. A qualified analyst does not and should not casually
report or publish the results of each analytical determination. Generally,
after the measurement results are obtained, after error analysis, when the
total error of the analysis data is determined to be less than the specified
allowable error, this one (or a group of) data is regarded as the correct
measurement result and reported or published. Otherwise, inaccurate data will
have serious adverse consequences for production managers.
2. Analysis of common instrument
calibration
As a quantitative analysis instrument, a
portable gas analyzer must be calibrated (or calibrated) with a standard gas
before performing quantitative analysis. Standard gas is generally purchased
from the national metrology department or a legal factory. In special cases, it
can also be configured on its own (but it must have the qualification and
ability to configure standard gas and related equipment). The standard gas
shelf life is one year. When using the standard gas calibration analysis
instrument, you must also thoroughly understand the normal procedures and usage
rules. If you buy and use an unsuitable standard gas, it will cause a great
deviation in the analysis data. If you do not know the requirements for the use
of standard gas, it will also cause trouble for air separation production
because you cannot get accurate data results.
3. Analysis of linear relationship of
portable gas analyzer
First of all, in order to ensure the normal
operation of the gas analyzer, the analytical instrument, as a precision
instrument of the measuring instrument, must be tested and calibrated regularly
in accordance with the regulations formulated by the country. At the same time,
a series of standard gases are used every year to check whether the linear
relationship of the instrument in the entire linear range remains normal.
Otherwise, it is blindly believed that the integrity of the analytical
instruments (even imported instruments) will definitely cause wrong data to
cause errors in production management and quality management.
View more oxygen analyzer at www.avcray.com.
评论
发表评论