Advantages of Labideal Vacuum Pump
The
vacuum pump is suitable for vacuum distillation, vacuum coating, extraction,
reforming, leak free gas transmission, vacuum material preparation and other
processes. Application fields: aerospace, petroleum, chemical industry,
refining, electronics, pharmaceutical, biopharmaceutical, metallurgy, nuclear
energy, oil and gas recovery, special gas manufacturing and other industries.
IFAC
vacuum pump has a strong ability to pump condensable gas, including pure
solvent gas, which can achieve gas-liquid separation, independent recovery and
reuse; manual control and DCS control can be used, flexible start, small impact
of the whole machine, long service life; it has the function of no disassembly
and cleaning, and in the use process, such as deposition of a large number of
dust or viscous substances, foreign matters, etc., it can be used without
dismantling the pump In case of internal cleaning, the pump shall be cleaned
completely within half an hour and restored to the factory level, with stable
working condition.
The
maintenance of the vacuum pump is very important, including the following
points that need special attention.
(1)
Check whether the oil level is low dry oil mark regularly. If the oil level is
low dry oil mark, oil should be added in time. If the oil level is low dry oil
mark, it will affect the vacuum degree of vacuum pump. The oil volume should
not be too much, otherwise it will cause difficulties in starting, oil
injection and other problems,
(2)
In the maintenance of vacuum pump, we should always pay attention to whether
the vacuum pump operates normally, whether there is special sound, whether the
machine is overloaded, and whether the temperature opening of motor vacuum pump
is too high,
(3)
For the vacuum pump cooled by water, the cooling water shall be prevented from
being interrupted, and the temperature of the vacuum pump shall not exceed 70 ℃. If
the ambient temperature is 5 ℃ low, the cooling water in the
vacuum pump shall be drained after shutdown to prevent the vacuum pump from
freezing and cracking,
(4)
The vacuum pump shall be kept clean through belt, and no other objects shall be
placed on the vacuum pump,
(5)
If necessary, adjust or replace the belt,
(6)
The vacuum pump oil should be changed 1-3 times a year. The mechanical vacuum
pump for vacuum melting may change oil many times a month. This is because
during the use of the dry vacuum pump, the vacuum pump oil will be polluted by
ash, moisture or other dirt, or soap, carbonization, which will affect the
performance of the vacuum pump. Therefore, it is necessary to change oil
regularly according to the specific situation
评论
发表评论